LED Panel Lights

LED panel lights are a type of lighting fixture designed to replace conventional fluorescent ceiling lights. They are one of best lighting options for indoor settings. The LED technology has been widely used for quite some time now, but panel lights that use the technology are fairly new to the market, and are gaining ground due to the sleek look, and innovative features and design.

Energy Efficiency

LED lighting uses considerably less energy compared to other lighting devices such as incandescent bulbs and even compact fluorescent lights (CFLs). The power consumption of a LED bulb is estimated to be around 6 watts, which can produce lighting quality similar to light bulbs that consume at least twice the amount of power.


Light Quality

The LED guide plate is a type of optical material designed to offer bright and homogeneous lighting when connected to a power supply. The guide plate and diffuser work together to produce evenly distributed, wide and soft lighting. The technology used in the lighting makes instant starts possible. There is no humming, flickering or RF interference.



Material and Color

Aluminum is the best material for the frame, and it is also used for the back cover. The LEDs itself are usually made from aluminum, arsenide and gallium. Impurities are added to create free electrons and enhance the semiconductor material’s conductivity. These impurities could also determine the color of the light, which is why the desired color could be achieved without the use of a filter. LED lights can also produce white light.

Design

LED panel lights are constructed in such a way that allows for better illumination conditions. This kind of lighting makes use of the latest in LED (light emitting diode) technology. LED panel lights typically feature a lightweight aluminum frame which houses three layers. The frame is one of the more important led panel light parts as it is designed to prevent light leakage. The layers inside include LED chips, a light guide plate and a diffuser. The diffuser is usually located right at the front of the light guide plate; its function is to distribute light evenly across the surface. There is also a reflector plate right at the back of the LED guide plate. Another vital part is the solid backing, which also has an effect on the lighting fixture’s overall look. LED panel lights are also equipped with a heat sink system to ensure safety.

Life Span

This kind of lighting is known for its extremely long usability span. The average LED bulb could be used for up to 60, 000 hours, far more than the estimated lifespan of the 60-watt incandescent bulb which is only 1, 500 hours, and that of CFLs, which are between 6,000 and 15,000 hours. They are also less likely to burn out; in fact, their life span is calculated not by measuring the true number of hours that the lights continue to function, but by measuring the number of hours that they continue to function within the satisfactory luminescence range. When the luminescence rating is down by 30%, that is the time that the bulbs need to be replaced.

above – the way that the LEDs are embedded into the panel itself, they can be shaped into almost any form desired. These allow them to be used for applications where the use of traditional incandescent lighting would be difficult or impossible, such as backlighting for molded bar tops.

When compared to traditional lighting, acrylic light panels utilizing LEDs are much more durable. On average, incandescent lighting and even more modern compact fluorescent lights will last for only a fraction of the time that a panel can. Assuming usage of eight hours per day, an LED can be expected to last for around 17 years. This lengthy total life makes them very cost-effective over all but the shortest periods of time.

When compared to traditional lighting, acrylic light panels utilizing LEDs are much more durable. On average, incandescent lighting and even more modern compact fluorescent lights will last for only a fraction of the time that a panel can. Assuming usage of eight hours per day, an LED can be expected to last for around 17 years. This lengthy total life makes them very cost-effective over all but the shortest periods of time.

The acrylic used for light panels is resistant to shattering and to many corrosive chemicals, as well as being able to withstand hot and cold temperatures and humidity levels. This durability also makes LED light panels ideal for installation in places where maintenance is difficult, such as hard-to-reach areas which might require closure of a building for full replacement to be carried out. This in turn will lead to a reduction in total costs.


About

SOAR LED LIGHTS started by four young entrepreneurs, having sole reason behind it. To give our next generation a better world to live. Before starting the company all had did the required research in area of market survey (nationally) and product design.

More

Contact us

SOAR LED LIGHTS
3rd Floor, Balaji sankul, Near khwaja miya darga, Ganesh colony,
Jalgaon-425001 Factory
Phone:   0257-6050505
Email: customercare@soargreen.com
Link: www.soargreen.com

© 2015, all right reserved by SOAR LED LIGHTS. Design & Development by Swaraj IT Services

ANY INQUIRY..??